HUSQVARNA 61 66 262 266 268 281 365 371 372 18″ 3/8 1.5mm 0.058″ Guide Bar

Description

Guide bar 18" 3/8 1.5mm fits Husqvarna 61, 66, 262, 266, 268, 281, 365, 371, 372 and 372XP chainsaws. The guide bar is the steel rail around which the cutting chain runs, supported at the tip by the sprocket nose and driven at the heel by the drive sprocket. The 3/8 pitch and 1.5mm (0.058") gauge must match the cutting chain and drive sprocket fitted to the saw — fitting an incorrect bar risks chain derailment and damage to the drive system. A worn bar with grooved rails, a seized sprocket nose or bent body causes uneven chain wear, poor cutting performance and increased risk of chain throw.

Fits the following Husqvarna models:

• Husqvarna 61
• Husqvarna 66
• Husqvarna 262
• Husqvarna 266
• Husqvarna 268
• Husqvarna 281
• Husqvarna 365
• Husqvarna 371
• Husqvarna 372
• Husqvarna 372XP

We have matching chain - SKU 370111 (18" 3/8 1,5mm 0.058" 68DL).